Keep Your Sprinkler System in Good Condition With These Maintenance Tips

Keep Your Sprinkler System in Good Condition With These Maintenance Tips

A sprinkler system is an automatic irrigation system that has a series of pipes and heads which are located on the ground or buried just beneath it and are connected with the main water supply. It’s a really efficient method of irrigation, but if not installed and maintained properly, it does more harm than good. A sprinkler system is amazing for the irrigation of lawns and other small landscapes in your home. They work effortlessly and uniformly to distribute water across your yard.

This is a great alternative for taking a hose and running around the place, which not only takes up more time but also wastes a great deal of water which can damage the plants or grass as well. Sprinkler systems are great in this regard, but people think they’ll work perfectly for a lifetime and won’t need any maintenance. In order to ensure your sprinkler system stays in good condition, here are a couple of maintenance tips you can implement.

Perform a Regular Check-Up

Because these systems are autonomous, people tend to forget about them and don’t check up on them often enough. To make sure that your sprinkler system is in good working condition, experts recommend that you perform a regular check-up. They need to be thoroughly checked at least 2 to 3 times per season. The first inspection should be done at the start of the season before starting your system. This checkup is necessary because it may reveal several faults in the system which may cause catastrophic failure in the near or far future.

The second check should be done halfway through the season. It’s essential to ensure that the system is working fine and the continuous working hasn’t damaged any components. The third and final check is done at the end of the season before turning it off for the next season and checking all the batteries, valves, and pipes for leaks. You can also check the system every month to inspect the backup battery, wiring, water heads, and pipes to see if they’re up to par or need replacement.

Adjust Heads

Heads need to be adjusted every once in a while because they can be shifted out of position by impact by feet and even lawnmowers. This changes their orientation and direction of spraying which can be problematic at times. Some areas won’t receive water at all, while others receive more water than required.

This non-uniformity in the distribution of water is really dangerous for some plants. It’s dangerous in both cases since they either get less water and dry out or they get too much water which also damages them. They can also be damaged by constant stomping and collisions so it’s best to check them once in a while to ensure they’re in a good condition and to see if they require repairs. Check the position of the heads regularly and adjust them accordingly.

Winterization of Systems

Winterization of sprinkler systems plays a crucial role in their maintenance. It is important to prepare systems for the winters. During winters, the temperature usually drops and due to this the water inside the heads freezes and causes the pipes to burst.

Another reason why you would want to winterize your sprinkler system is that if you don’t, the water will continue to flow at a normal rate which will cause the grass on your lawn to grow at a faster rate and become problematic. You need to learn how to winterize a sprinkler system because it comes in handy if you want to properly maintain your irrigation system and avoid costly repairs in the future. It is not as difficult as it sounds. All you need to do is turn off the main water supply and release pressure in all the irrigation zones by turning all the valves on. Moreover, flushing the pipes and heads is also helpful.

Set Controller

Set your controller to water the plants as much as they need. Not all plants require the same amount of water and so setting the controller to the right amount is extremely important. It’s a good habit to change the controller settings with the seasons so the plants are getting the right amount of water appropriate to the time of year. During winters, plants usually require less water due to the shift in temperature. At that time of year, their growth is slower and water evaporates at a slower rate. However, during summertime plants get the right amount of sunlight and water evaporates much faster, and as such, they require more water. Setting your controller according to the watering needs of plants is essential.

Check for Leaks

Leakages in pipes can be problematic at times. Excess water not only damages plants but also wastes water. The best way to check for leaks is by turning on the system and then observing all the pipes, valves, and heads to see if excess water is being released from any of these points. Excess water escaping over a long period can kill most plants and the wastage of water that occurs is unsustainable.

Sprinkler systems are amazing for irrigation and perform effortlessly once proper maintenance is periodically carried out. To ensure that your system is in a good condition, it’s good to follow the steps mentioned above. Performing regular checks is necessary to ensure it stays in good condition. These checkups can be made monthly or 2 to 3 times per season. The heads play a crucial role in the system’s operation. They need to be adjusted from time to time according to your needs. One of the most promising ways to ensure your sprinkler system stays in good condition is to winterize it before the cold weather sets in. This can save you the trouble of fixing or replacing burst pipes in the winters or prevent the abnormal growth of grass. Ensure that the controller is set according to the needs of your plants and that only the required amount of water is released from the heads. Regularly check for leaks in pipes and heads to prevent water from being wasted.